1. SD-1 Minisport full version plans, TD, TG, TGC, TD XL, TG XL, TGC XL
The drawings in english drafted in CAD program are printed on 31 sheets of A1 size (594×841 mm, 23”x33”) and 15 smaller sheets. All complex curve parts are printed in full scale for simple templates making. The construction manual and material list is included.
Important notice: the main wing, elevator and fin spars are not included in drawings. These parts are made of vacum bagging technology and due to this are delivered in basic kit.
Price: 270,- Eur +VAT and shipment
Plans sample
2. SD-1 Minisport less pre-molded composite parts plans
This version is for builders who use pre-molded composite parts in the construction. It does not contain drawings and templates of fuel tank, cabin hood and wing tips. The rest of drawings are same like at full version. These plans are included in all full airframe kits for no charge.
Price: 240,- Eur + VAT and shipment
3. Full scale fuselage sidewall
This CAD precision 610×3200 mm (23”x126”) size drawing can save you few hours spent with redrawing of fuselage side from plans. Put it on workbench, plastic foil over and you can start construction!
Price: 25,- Eur + VAT
Payment of VAT is compulsory only for citizens of EU
THE SD-1 KITS AND SETS
Basic kit
This kit is necessary for construction. Contains main wing, elevator and fin spars and pultruded carbon strips for fuselage reinforcements. The hinges are mounted onto elevator spar and fin spar is fitted with bushes and connection pin. All spars have caps made of carbon fibre and are manufactured from certified materials. Thanks to technology used the single main wing spar does not weight more than 2 kg (4 lbs).
Construction time of plane using basic kit and plans:800-1200 hrs
Basic kit (spars)
Basic+ kit
This kit prevents builder from most complex building stage– levelling of wing spars and fuselage tunnel together and following bushes reaming. The company fixture assures best possible precision. Builder will receive all spars and ready to use fuselage tunnel with yet reamed bushes. It saves app. 40 hours of work and price for 12 mm reamer.
Starter kit – rudder
This kit is suitable for builders without any former experience with wood-foam construction. The kit contains all construction material including hardware, pre-cut ribs, drawing in 1:1 scale, construction manual, glue and varnish.
Starter kit – rudder
AIRFRAME MATERIAL KIT
The “Material kit” consists of wood and plywood raw material. Kit also contains pre-cut XPS ribs, complete undercarriage, controls, hardware, all composite pre-molded parts and cabin hood shield ready to use. Plans and construction manual. The kit could be delivered in groups without increased price.
The kit does not include: seat belts, upholstery, instruments, paint
Construction time: 600-900 hours
FUSELAGE SIDEWALLS
This option can bring significant time savings for scratch builders. It is made in precise company fixture. It could be sold as part of basic or material kit.
Airframe 51% kit
The kit is suitable for builders from countries with strict regulation of amateur building (USA, Australia etc.). The wings are finished with the upper skin attached so that inside of wing could be checked by authorities before closing. The fuselage is prepared to the QB stage without glued on tank and fin. The construction of the tails and flaperons is left on builder. The undercarriage, controls, hardware and all composite pre-molded parts are included. Options like rescue system preparations are available. The kit could be delivered in groups without increased price.
The kit does not include: seat belts, upholstery, instruments, paint
Construction time: 400-700 hours
Airframe 51% kit
Airframe quick build kit
The kit contains: fuselage including fin, wings, flaperons, elevator and rudder. All wood varnished. Parts of complete undercarriage, controls, hardware, plans and construction manual. Options up to filler paint are available. Call for order form.
The kit does not include: seat belts, upholstery, instruments, paint
Construction time: 100-300 hours
Airframe quick build kit
SETS
1. Undercarriage
The set contains: complete main undercarriage legs including hinges, complete wheels with drum brakes, complete tail or nose wheel.
Undercarriage TD Undercarriage TGC
2. Composite parts
The set contains all composite parts except of Basic kit ones. Front upper part of fuselage from firewall to cockpit containing fuel tank ready for assembly on fuselage. Wing and horizontal tail tips. Cabine hood. Seat. Covers of gear legs and wheels. Fuselage-wings fillets.
Composite parts
3. Metal parts and hardware
The set contains all metal parts and hardware used on the airframe except of undercarriage.
Metal parts and hardware
4. Ribs and bulkheads
The set contains ready to use CNC cut ribs of wing, flaperons, tails and fuselage bulkheads.
Ribs and bulkheads
SINGLE PARTS
You can buy any single part you need for construction.
CONTACT US FOR CURRENT PRICES